Starting the power supply wiring
I got a modest start on the power supply tonight. I installed the newly potted power transformer, as well as the new multi-cap can and 3 new switches. I got the 5v and 6.3v heater wires, and the power transformer secondary wires connected to the tube sockets. I temporarily mounted the new turret board, in order to get the transformer leads run in an orderly manor.
Heater and secondary leads connected
My next step will be to wire the primary side of the transformer. I will hold off wiring-in the fuse holder until I have everything wired to the cap can, since that’s easier to do with the fuse holder out of the way.
Categories: Ampeg B15NC Project